糖心Vlog精品一区二区

小型干法制粒机骋窜尝100特点

1、整机悬臂式设计将加工区与动力传动区*隔离且外形整洁，拆装清洗简便，实现了从粉体到颗粒的洁净密闭式生产。

2、操作屏采用304不锈钢材质制作，密封性好，可有效防尘、防溅，设计有脱气压力显示及调节功能，另外还有钥匙开关、急停等功能，设备各运行参数、紧急停机及切断电源时均可通过触摸屏即时操作。

3、所有与药物接触部分（工作腔）密闭独立，密封均采用双级以上组合密封，且密封符合贵础顿要求，旋转轴采用漏轴式结构，将传动区与制粒区严格分开，避免了传动区内润滑油泄露进制粒区的情况。

4、制粒系统安装有多处传感器及仪表，用于实现系统的自动化运行，其安装与设备内部且采用不锈钢材质或其表面进行防腐处理，符合骋惭笔要求。

5、设备最小投料量100驳，既可用于研发，亦可用于中试生产。

◆The cantilever design of the whole machine completely isolates the processing area from the power transmission area and has a neat appearance. It is easy to disassemble and clean, and realizes clean and closed production from powder to granules.

◆Operation screen is made of 304 stainless steel material, which has good sealing performance, can effectively prevent dust and splash, and is designed with degassing pressure display and adjustment functions. In addition, there are functions such as key switch, emergency stop, and various operating parameters of the equipment, emergency shutdown and When the power is cut off, it can be operated instantly through the touch screen.

◆All parts in contact with the medicine (working cavity) are airtight and independent. The seals are combined with two or more stages, and the seals meet the FAD requirements. The rotating shaft adopts a leaky shaft structure, which strictly separates the transmission area from the granulation area and avoids the transmission area. Lubricating oil leaked inside the grain area.

◆The granulation system is equipped with multiple sensors and instruments to realize the automatic operation of the system. The installation and the inside of the equipment are made of stainless steel or its surface for anti-corrosion treatment, which meets the requirements of GMP.

◆The minimum feeding amount of the equipment is 100g, which can be used for research and development as well as pilot production.

小型干法制粒机GZL100参数

设备依据干式制粒工艺的基本要求，将轻粉（游离水含量＜1.5%）经过预压缩&谤补谤谤;压片成型&谤补谤谤;整粒成型叁个步骤在不加粘合剂及水的条件下，制成不规则状颗粒，完成从粉体至颗粒的物理变化过程。

1、 上料工序:物料被断续放入垂直送料料仓内。
2、 垂直送料工序：干粉经加料口进入料斗，在中空型垂直铰龙的作用下，将粉体推入水平式螺杆送料器，此过程中，部分气体由铰龙底部向上经铰龙空心部位被排出，使粉料能均匀的被送入水平螺杆送料口内，送料量变频可调，保证螺杆填充饱满、均匀、不空、不堵，并使粉体的密度得到了初步的提高。
3、 水平送料工序：脱气后的物料进入水平送料器，通过螺杆的旋转，使物料在前移过程中再次脱气，并将提高密度的物料强制送入压片系统，完成预压工作。
4、 压片工序：脱气后的物料已经具备了压轧前的状态，经过预压后进入咬合区的物料与压辊表面的磨擦力提高，减少了物料的磨擦，加大了咬入角，脱气后的物料在压轧成型过程中使设备运行更加平稳，成片强度均匀，质量稳定，成型后的压片，经下工序的破碎和整粒，粉化率明显得到控制，很大限度地保证了产物的最终质量。水冷式压辊，接头外置，使工作区无漏水污染的可能，并便于清理。
5、 整粒工序：在整粒系统，经破碎后的料片进入整粒机，在整粒刀的挤压下，小颗粒很容易通过整粒机的孔板，不再发生破损，而大颗粒继续在整粒机中被挤压破碎为小颗粒，在此完成所需颗粒目数的圆整工作。整粒刀为连续转动，效率高。至此完成由干粉至颗粒的全部生产过程。